HD IP camera systems, access control, and remote monitoring — designed, installed, and supported by a Florida-licensed Brevard team that also runs the cabling and network they ride on. See your business from anywhere, and control who gets in.
A break-in, a slip-and-fall claim, internal shrinkage, an after-hours alarm — these are the moments business owners wish they had clear footage and a record of who came and went. Too many Brevard businesses are running a handful of old analog cameras with grainy footage that’s useless when it matters, or no real access control beyond a key everyone has copied.
BBTS designs security systems that actually do their job: high-resolution IP cameras placed to cover what matters, footage you can pull up from your phone, and access control that replaces shared keys with credentials you can grant and revoke in seconds. Because we also install your cabling and network, the cameras are powered cleanly over PoE and properly segmented from the rest of your business — one accountable Space Coast team, since 1982.
From a few cameras at a single storefront to multi-building surveillance and access control, BBTS designs the system around your risks, your layout, and your budget.
High-resolution IP cameras placed for real coverage — entrances, registers, docks, parking, and blind spots.
Replace shared keys with credentials you manage — grant, revoke, and audit who enters every door.
Local or cloud recording sized for the retention you need, with live and recorded video on any device.
Cameras and access control are network devices — they need clean power, bandwidth, and segmentation to work reliably and securely. That’s why we design security alongside your network and cabling, and can pair on-site recording with managed cloud backup so footage survives even if hardware is stolen.
For nearly every new business install today, the answer is IP. Analog still exists, and there are narrow cases for it, but here’s the honest comparison.
| Factor | IP Cameras | Analog (Coax) Cameras |
|---|---|---|
| Image quality | HD to 4K — readable faces & plates | Lower resolution; often grainy |
| Cabling | One Cat6 cable: data + power (PoE) | Coax + separate power run |
| Cable distance | ~100m per run (extendable with switches) | ~330 ft on coax before signal loss |
| Smart features | Motion zones, analytics, smart alerts | Very limited |
| Remote viewing | Native — phone/tablet/desktop | Possible but clunky, lower quality |
| Best for | Almost all new business installs | Reusing existing coax on a tight budget |
If you already have good coax in the walls and a tight budget, modern HD-over-coax can stretch an analog system further. But for a new install, IP over Cat6 is simpler to run, far higher quality, and ready for analytics — which is why we spec it in most cases.
A camera in the wrong spot is a camera that misses the moment. BBTS designs coverage from your actual layout and risks, installs it cleanly to code, and ties it into a network built to carry it.
We walk the property, design coverage, install cleanly, and show you how to use it — then stay on for support.
We assess your property, entry points, risks, and what you need to see and protect.
We lay out camera placement, access points, recording, and retention — and how it sits on the network.
Cameras and readers mounted and cabled to code, powered over PoE, and segmented onto their own VLAN.
We configure remote viewing, train your team, and stay on to service and expand the system.
Adding cameras during a build-out or a cabling project? We’ll run the camera and access-control cabling on the same trip as your structured cabling — cleaner, faster, and one coordinated scope.
BBTS installs business security cameras and access control across Brevard County — including Melbourne, Palm Bay, and Titusville — and into Volusia County / Daytona Beach as a reach market.
It’s driven by coverage, not a round number. The goal is to capture every spot where something important happens or where you’re exposed: each exterior entrance and exit, the parking lot and approaches, registers or cash-handling areas, loading docks, server/IT rooms, and any blind corners. A small retail storefront might be well covered with 4–8 cameras; a warehouse or multi-entrance facility can need 16, 32, or more. The mistake is buying a “camera kit” off a shelf and hoping it covers the building. We walk the property, map the angles, and spec the count and lens type per location so there are no gaps — and no wasted cameras pointed at a blank wall.
For a new business install, IP is the better choice in almost every case. IP cameras deliver far higher resolution (HD to 4K, so you can actually read a face or a plate), run on a single Cat6 cable that carries both data and power over PoE, and support smart features like motion zones and analytics. Analog runs over coax, tops out at lower resolution, and is limited to about 330 feet per run before signal degrades. The one place analog still makes sense is when you already have good coax in the walls and a tight budget — modern HD-over-coax can reuse it. Otherwise, IP over Cat6 is simpler and dramatically better.
Both have a place, and the best setups often use a mix. A local NVR (network video recorder) keeps footage on-site, gives you fast access and no monthly storage fee, and isn’t dependent on your internet — but if the NVR is stolen or damaged, the footage can go with it. Cloud recording stores video off-site, so it survives a break-in or fire and is reachable from anywhere, at the cost of a subscription and bandwidth. For many Brevard businesses we recommend a local NVR for day-to-day retention plus cloud backup of critical cameras, so you get speed and resilience. We size retention (how many days you keep) to your needs and your industry’s requirements.
Yes — remote viewing is standard on the IP systems we install. You get a secure app (and desktop access) to watch live feeds and pull recorded footage from anywhere, plus motion alerts so you’re notified when something happens after hours. We set this up properly and securely — remote access done wrong is a real security hole, so the cameras sit on their own segment and access is locked down, not just port-forwarded and forgotten.
Both, and they work best together. Access control replaces physical keys (which get copied and never returned) with fobs, cards, or mobile credentials you can grant and revoke instantly, set on schedules, and audit — so you know exactly who opened which door and when. Tie it to your cameras and an entry event can be matched to video automatically. We install standalone camera systems, standalone access control, or an integrated system covering both, depending on what your Brevard business needs.
Tell us what you need to see and protect. We’ll walk your property and design cameras and access control that cover the right places — with a clear quote from a FL-licensed local team that’s served Brevard since 1982.
Part of one accountable Space Coast team — explore all BBTS managed services.